|
As of 12/16/11
The U.S. Coast Guard publishes defect recall notices on a monthly
basis. Defect recalls are listed by Manufacturers Identification Code
(MIC) and company. When contacting the manufacturer about a recall,
refer to the recall campaign number listed in the "Number" column.
For earlier recalls, visit the Coast Guard's web site, http://www.uscgboating.org.
Click on the "Recalls & Safety Defects" icon. Or, call the Coast
Guard Boating Product Assurance Division, (202)-372-1073.
MIC |
NUMBER |
COMPANY |
MODEL
NAME |
YEAR |
PROBLEM |
UNITS |
COMMENTS |
| ZZN |
110047T |
Bombardier Recreational
Products |
GTI & GTS |
2011-12 |
Storage cover cracking |
10,031 |
In rough water conditions the front storage cover may break around its hinge. This could cause the storage cover to dislodge and hit the operator and/or passenger, resulting in personal injury loss of control. Models affected are 2011 GTS, GTS Rental, GTI, GTI SE, GTI LTD and Wake; 2012 GTS, GTS rental, GTI, GTI SE, GTI LTD and Wake
|
| |
|
Mustang Survival |
22LB buoyancy inflatable PFDs, models MD2010 and MD2012 |
2011 |
|
850 |
Mustang Survival is voluntarily recalling all model number MD2010 and MD2012 22LB buoyancy inflatable Personal Flotation Devises (PFDs) sold in the United States during 2011. No other Mustang Survival products are affected as they utilize different inflator assembly methods. This recall is being issued for the inspection and repair of an inflator installation inconsistency that may prevent some units from fully inflating with CO2. A solution has been developed that corrects any affected products and prevents recurrence of this issue.
The inspection and repair can only be performed at a Mustang Survival factory.
Consumers are urged to contact the Mustang Survival Customer Service Dept. at: 1-800-526-0532 between 7:30-4:30, Monday-Friday for shipping instructions.To determine if you are impacted by this recall please check for the following:
1) Any inflatable product with multiple white sewn on safety labels on the Back is OK and is NOT affected by this recall.
2) If your inflatable does not have white sewn on safety labels, please check for model number MD2010 or MD2012 on the back of the PFD, then refer to #3.
3) MD2010/MD2012 models with an "MIT" (Membrane Inflatable Technology) stamp (in black or color) above the CO2 cylinder is OK. But any MD2010/MD2012 missing the "MIT" stamp should be returned to Mustang.
|
To determine if you are impacted by this recall please check for the following:
1) Any inflatable product with multiple white sewn on safety labels on the Back is OK and is NOT affected by this recall.
2) If your inflatable does not have white sewn on safety labels, please check for model number MD2010 or MD2012 on the back of the PFD, then refer to #3.
3) MD2010/MD2012 models with an "MIT" (Membrane Inflatable Technology) stamp (in black or color) above the CO2 cylinder is OK. But any MD2010/MD2012 missing the "MIT" stamp should be returned to Mustang.
|
